This Users Help System provides typical information for using ECD M.O.L.E.® Thermal Profiling Systems, Sensor Platforms & M.O.L.E.® MAP Software. Use the Contents tab or select a specific product to view it's Help content:
Instruments |
|||
|---|---|---|---|
|
|
|
|
M.O.L.E.® EV6 |
SuperM.O.L.E.™ Gold 2 |
SuperM.O.L.E.™ Gold |
M.O.L.E.® EV12 |
|
|
|
|
M.O.L.E.® EV20 |
MEGAM.O.L.E.™ 20 |
V-M.O.L.E.™ 2 |
V-M.O.L.E.™ |
|
|
|
|
MiniM.O.L.E.™ rH |
|
|
|
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Sensor Platforms |
|||
|---|---|---|---|
|
|
|
|
WaveRIDER® NL 2 |
OvenRIDER® NL 2+ |
OvenCHECKER™ |
SelectiveRIDER® |
|
|
|
|
BreadOMETER® |
VaporWATCH® |
|
|
.png)
.png)
.png)
.png)
.png)
.png)
This Users Help System explains how to use ECD Thermal Profiling instruments and software.
This Users Help System is written for users of varied experience. If a section covers information you already know, feel free to skip to the next section.
•You do not need to be a computer expert to use this Users Help System or the software.
•The Users Help System assumes you are familiar with Microsoft® Windows® Operating Systems.
|
Hardware portions of this manual are written to reflect the following firmware versions: •MEGAM.O.L.E.™ 20, V-M.O.L.E.™ and SuperM.O.L.E.™ Gold 2: 10.80 and higher. •M.O.L.E.® EV6. M.O.L.E.® EV12, M.O.L.E.® EV20 and V-M.O.L.E.™ 2: 01.90 and higher. •SuperM.O.L.E.™ Gold: 9.08 and higher. The software portions reflect version(s) 3.22n and higher. |
.png "Important Information")
|
The M.O.L.E.® MAP software is designed to be used with the following ECD Thermal Profilers: M.O.L.E.® EV6, M.O.L.E.® EV12, M.O.L.E.® EV20, V-M.O.L.E.™ 2, SuperM.O.L.E.™ Gold 2, MEGAM.O.L.E.™ 20, V-M.O.L.E.™, SuperM.O.L.E.™ Gold & MiniM.O.L.E.™ rH References used in common operation and software sections of this Users Help System may refer to the SuperM.O.L.E.™ Gold 2. |