For ease of insertion and removal, and to avoid bending pins, of the nano thermocouple connectors use the following instructions.
Insertion and removal:
| 1) | Grasp the Nano-connector on the back ridge (closest to the I/O Pod), or by the groove (Patent Pending). |
| 2) | Push/Pull straight in/out (along the Z-axis). |
|
To avoid damage to the I/O Pod pins: •Do NOT rotate the Nano-Connector about the X-axis (Up/Down motion). •Do NOT pivot the Connector about the Y-axis (Left/Right motion). |
.png "Warning")
