The safety information in this summary is for the benefit of operating personnel. Warnings and Cautions will also be found throughout the manual where they apply.
.png "Caution")
•Hardware changes or modifications to the OvenRIDER NL components, is not expressly approved by ECD could void the product’s warranty.
.png "Caution")
•Some components may be sensitive to magnetic fields. Although most standard components are not, you should consult the manufactures specifications for special precautions that may exist for the specific components you are processing.
Battery Warnings:
•Replace Zone Boundary Sensor battery with SAFT lithium 3.6V 1/2AA, or equivalent.
•Using another battery may present a risk of fire or explosion.
•Battery may explode if mistreated.
•Do not recharge, disassemble, or dispose of in fire.
•Do not expose to temperature above 100°C (212°F)
•Batteries contain electrolytes. Dispose of used batteries promptly and properly.
•Keep batteries away from children.
For protection of the OvenRIDER® NL 2+ components, observe the following:
•Do not subject the OvenRIDER® NL 2+ components to sharp impacts.
•Do not excessively stress the PC serial cable.
•Do not expose the OvenRIDER® NL 2+ components to corrosive environments.
•Do not expose the OvenRIDER® NL 2+ above the specified maximum temperature.
|
The warranty will not cover damage caused by neglect or abuse of this product. To maintain the safety features incorporated in this product, operation must be in strict compliance with the requirements specified herein. |